Home » Posts tagged 'hardwood floor refinishing companies'
Tag Archives: hardwood floor refinishing companies
Hardwood Floor Refinishing NJ is a cost-effective way to make them look new again. This process involves sanding, staining, and sealing. It can take four to seven days for the process to be completed.
Begin by removing vent covers and quarter-round trim. Clean the floor and vacuum thoroughly. Then, buff the floor with a buffer and fine-grit sandpaper.
When refinishing hardwood floors, it is crucial to sand the surface of the wood properly. This step removes any old finish and scratches, allowing the new stain to adhere better. It also helps prevent splintering of the boards. A good quality drum sander or orbital sander is the best tool for this job, as it can be used by almost anyone with little experience. It is important to use a dust mask or respirator when sanding, as the fine dust can cause sinus problems and other health issues.
Initially, it is a good idea to start with a 40-grit belt on the sander and work up through the grits. This will remove most of the old finish and major scratches, leaving the floor ready for a new coat of finish. While sanding, it is important to switch out the sandpaper often and not overdo it with any one grit. This will keep the sanding process as quick as possible and ensure that you don’t ruin the hardwood by overdoing it.
After the sanding is done, it’s important to vacuum the floor and get all of the dust in the nooks and crannies of the room. This is especially important for areas around the baseboards, radiators and other hard-to-reach spots. You should also sand the edges of the floor to make sure that the new finish is even with the rest of the wood.
Once the floor is clean, it’s a good idea to open the windows to improve ventilation. It’s also a good idea to remove furniture, drapes and pictures from the room, as these can be damaged by the sanding dust. Finally, it’s a good idea to put plastic or painter’s tape on sensitive wall items like thermostats and wall unit air conditioners to protect them from the dust.
When applying the new topcoat, be sure to use a low-VOC product. These finishes are less likely to damage indoor air quality and require less time to dry than oil-based products. Once the final coat of finish has been applied, it’s a good idea to allow it to cure for a day or two before resuming regular use of the room.
There are a variety of colors and styles of stain that can be used on hardwood floors. It is a good idea to test a small area of the floor with the color and texture that you have in mind. This will help you get a feel for the finish before you apply it to the entire floor.
When it comes to staining, the most important thing is to make sure that the floor is properly sanded before proceeding. It is also important to follow the instructions on the product that you are using. The process can be quite messy, so it is a good idea to wear gloves and a mask. This will help to protect your skin and lungs from the dust that is generated during the staining process.
Once the stain is applied, it should be wiped down with a damp cloth. This will remove any excess stain and leave the floor looking smooth and even. It is also a good idea to allow the stain to dry completely before walking on it. It is recommended that you wait about 24 hours for the stain to completely dry.
It is also a good idea to use purified water during the staining process. This will ensure that the water doesn’t contain any contaminants that could interact with the stain and cause it to turn out blotchy. It is also important to stir the stain thoroughly. This will ensure that all of the pigment is evenly distributed throughout the container and that none of it will be lighter or darker than another part of the floor.
It is important to remember that a dark stain will show every scratch and blemish on the surface of the wood. This can be a disadvantage if you are trying to create a more elegant and sophisticated look for your home. Alternatively, you can opt for a clear coat of finish that will highlight the natural beauty of your floors without adding any color. This option can also be a great choice if you have pets that are prone to scratching and marking up your hardwood floors.
The final step in a quality hardwood floor refinish is to seal the new surface. This will protect the finish and prevent damage to the wood from water and stains. It is important to do this right, or the finish could peel or flake. There are several different types of sealers, and each has its own advantages and disadvantages. Some are natural, while others give a high-sheen appearance that is hard to beat.
It is important to make sure that the room is well-ventilated when you are sealing your hardwood floors, because many of them can emit harmful vapors. You also want to make sure that you are wearing the proper safety equipment, such as a respirator. You should also turn off the HVAC system and cover all vents to prevent dust from blowing throughout the house.
Before you begin sealing, you should vacuum the floor to remove all the sawdust and grit from the sanding process. You can also use a tack cloth to wipe the floor and remove any remaining dust. Then, you will need to vacuum the room again to get rid of any residual dust from the tack cloth.
You can choose from several different kinds of sealers, including shellac, polyurethane, and oil-based polyurethane. Shellac is an excellent choice for those who prefer a natural look to their hardwood floors, as it dries to a very smooth finish and does not emit a lot of fumes. However, it is not very durable and can be easily damaged by moisture.
Polyurethane is the most common topcoat for hardwood floors, and it comes in a variety of finishes from matte to glossy. It is easy to apply with a standard paintbrush, and it can be purchased in a wide range of colors. It provides the best protection for your hardwood floors, but it may need to be reapplied every six to 12 months.
If you prefer a more traditional look, you can use an oil-based polyurethane instead. This product is more expensive, but it offers a rich amber tint to your hardwood floors and will not yellow over time.
When it comes to hiring a contractor for your hardwood floors, it is important to choose one with a good reputation. You should be able to find online reviews, but you should also talk to friends and neighbors who have used the contractor. They can tell you if they were pleased with the quality of work and professionalism of the contractors. In addition, they can recommend other companies if they were dissatisfied.
While it is important to ask a potential contractor for references, you should not be afraid to ask for proof of insurance as well. This will help you protect yourself against any unforeseen accidents that may occur during the work process. Additionally, you should make sure that the company has liability insurance and that it is licensed.
Once you have chosen a contractor, it is important to discuss all the details of the job. This includes the cost, time frame, and what is included in the job. For example, you should be clear about whether the contractor will remove carpet and furniture from your home or if this will be a separate charge. It is also important to know how long the job will take so you can plan accordingly.
The last step in choosing a contractor is to look at their previous work. This can be done by looking at before and after photos or asking for a list of references. You should also ask about the different aspects of their job, such as dust control and how they handle baseboards. A reputable flooring contractor will be happy to provide you with these details.
Hardwood floor refinishing is an important investment in your home. It can enhance its value and improve your lifestyle. By following these tips, you can ensure that your wood floors are refinished correctly and look beautiful for years to come.
It is recommended that you refinish your hardwood floors every 8 to 12 years. However, sometimes a full refinish isn’t necessary. In these cases, a screen and recoat is a more cost-effective option. This will restore the protective polyurethane layer on your hardwood floors without sanding them.